Blackout Sizer Calculator
EN
Home›Portable Power Stations›Pulsar›PPSK1810H

Pulsar PPSK1810H

Power station. Specs from the manufacturer page (checked ).

Pulsar PPSK1810H
Photo: Pulsar

The Pulsar PPSK1810H is a 1024 Wh portable power station built on a LiFePO4 battery rated for up to 4,000 cycles. It provides 1800 W of continuous pure sine wave AC output with 3600 W of surge power, from four 120V AC outlets. It recharges from AC power in approximately 1 hour and 10 minutes in 1200W fast-charge mode.

View at Pulsar →Sponsored link; we may earn a commission.
Capacity
1024Wh
Continuous
1800W
Peak / surge
3600W
Solar input
500W
Chemistry
LiFePO4
Cycles
4000
Weight
11.8kg

Key features

What it is for

Specifications

Capacity1024 Wh
Continuous output1800 W
Peak / surge3600 W
Solar input500 W
Battery chemistryLiFePO4
Cycle life4000 cycles
AC chargingRecharge from AC power in approximately 1 hour and 10 minutes
AC output voltage120V
Weight11.8 kg (26.0 lb)
Dimensions34.5 × 22.9 × 23.9 cm (13.6 × 9.0 × 9.4 in)

From the Pulsar page. Values the manufacturer does not publish are left out.

How long it runs common appliances

ApplianceWattsRuns?Hours
Refrigerator (with freezer)120 W (600 start)yes19 h
Chest freezer100 W (500 start)yes27 h
CPAP (no humidifier)35 W (40 start)yes23 h
Gas boiler (pump + controls)120 W (300 start)yes14 h
Wi-Fi router + modem/ONU12 Wyes68 h
Starlink (standard dish)60 W (100 start)yes14 h
TV 50"75 Wyes11 h
Sump pump 1/2 HP920 W (2150 start)yes0.9 h
Well pump 1/2 HP880 W (2000 start)yes0.9 h
Space heater 1500 W1500 Wyes0.8 h

Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.

Similar portable power stations

All Pulsar models →

Connection and wiring

Follow the diagrams in the Pulsar manual.

Error codes and troubleshooting

We found no error-code table in this manual. Its troubleshooting section is the reference.

FAQ

How long will the Pulsar PPSK1810H run a refrigerator?

About 19 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.

Can the Pulsar PPSK1810H start a sump pump or well pump?

Starting surge matters more than running watts: this unit is rated 3600 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.

Pulsar PPSK1810HView at Pulsar