Cummins Onan P2500i
2200 W, gasoline
Westinghouse iGen2800
Generator. Specs from the manufacturer page (checked ).
The Westinghouse iGen2800 is a gasoline-powered portable inverter generator rated for 2200 running watts and 2800 peak watts. Its 0.98 gal fuel tank is listed for up to 10 hours of runtime, and it is backed by a 3-year limited warranty.
View at Westinghouse →Sponsored link; we may earn a commission.
Running
2200W
Peak / surge
2800W
Fuel
gasoline
Weight
21kg
Warranty
3yr
Key features
- Two 120V 5-20R household outlets and two 5V USB ports, with rubber outlet covers
- Engine speed adjusts automatically to the load; the page says variable speeds allow 30% to 50% higher fuel efficiency than a traditional generator
- Runs up to 10 hours on a 0.98 gal (3.7 L) gas tank
- Noise as low as 52 dBA
- Less than 3% THD clean power for sensitive electronics
- Parallel capable with another Westinghouse Inverter Generator using a 30A or 50A Parallel Cord (sold separately)
- Automatic low oil shutdown and overload protection
- Recoil starter with an LED display showing output, fuel gauge, estimated run time and lifetime hours
What it is for
- Home backup during a power outage
- Camping
- Tailgating
- RVs
Specifications
| Running watts | 2200 W |
|---|---|
| Peak / surge | 2800 W |
| Fuel | gasoline |
| Tank | 3.7 L (1.0 gal) |
| AC output voltage | 120V |
| Weight | 21 kg (46.3 lb) |
| Dimensions | 50.3 × 29.0 × 45.5 cm (19.8 × 11.4 × 17.9 in) |
| Warranty | 3 years |
From the Westinghouse page. Values the manufacturer does not publish are left out.
What is in the box
- Oil bottle
- Oil funnel
- Spark plug wrench
Similar inverter & portable generators
DeWalt DXGNI2200
2200 W, gasoline
Generac 2500i
2200 W
WEN DF280iX
2250 W, dual-fuel
Generac GP3000i
2300 W
Ryobi RYI2322E
2300 W
A-iPower SC2500i
2000 W, gasoline
A-iPower SUA2600i
2000 W, gasoline
Connection and wiring
We have not linked an official manual for this model yet; see the Westinghouse page.
Error codes and troubleshooting
We have not found an official code table for this model yet.
FAQ
Can the Westinghouse iGen2800 start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 2800 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.