Cummins Onan P2500i
2200 W, gasoline
Westinghouse iGen2800c
Generator · iGen. Specs from the manufacturer page (checked ).
The Westinghouse iGen2800c is a gasoline-powered inverter generator with 2,800 W peak and 2,200 W running output at 120V. It runs up to 12 hours at 25% load and is rated at 52 dBA noise level with 3% or less total harmonic distortion.
View at Westinghouse →Sponsored link; we may earn a commission.
Running
2200W
Peak / surge
2800W
Fuel
gasoline
Noise
52dB
Weight
21.5kg
Warranty
3yr
Key features
- Outlets: one 120V TT-30R 30A outlet for RVs, one 120V 5-20R 20A standard duplex outlet, and two 5V USB ports
- Runs up to 12 hours at 25% load on gasoline
- Eco Mode variable speed engine adjusts engine speed to match power demand, cutting fuel use up to 50% versus traditional generators
- Total harmonic distortion of 3% or less (≤3% THD), for sensitive electronics
- Noise level of 52 dBA
- Parallel capable: can be paired with another compatible Westinghouse inverter to double output; parallel cables sold separately
- Safety: carbon monoxide (CO) sensor, automatic low oil shutdown, and overload protection
- LED data center shows fuel level, power output, remaining run time and voltage output; recoil starter
What it is for
- home backup
- RVs
- camping
- work
Specifications
| Running watts | 2200 W |
|---|---|
| Peak / surge | 2800 W |
| Fuel | gasoline |
| Tank | 3.7 L (1.0 gal) |
| Noise | 52 dB |
| AC output voltage | 120V |
| Weight | 21.5 kg (47.4 lb) |
| Dimensions | 50.3 × 29.0 × 45.5 cm (19.8 × 11.4 × 17.9 in) |
| Warranty | 3 years |
From the Westinghouse page. Values the manufacturer does not publish are left out.
What is in the box
- Oil Bottle
- Oil Funnel
- Spark Plug Wrench
Similar inverter & portable generators
DeWalt DXGNI2200
2200 W, gasoline
Generac 2500i
2200 W
WEN DF280iX
2250 W, dual-fuel
Generac GP3000i
2300 W
Ryobi RYI2322E
2300 W
A-iPower SC2500i
2000 W, gasoline
A-iPower SUA2600i
2000 W, gasoline
On our lists
Connection and wiring
We have not linked an official manual for this model yet; see the Westinghouse page.
Error codes and troubleshooting
We have not found an official code table for this model yet.
FAQ
Can the Westinghouse iGen2800c start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 2800 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.