Pecron F1000LFP
960 Wh, 1500 W
Bluetti Pioneer Na
Power station. Specs from the manufacturer page (checked ).
The Bluetti Pioneer Na is a 900 Wh portable power station with 1,500 W output and a 2,250 W surge rating, built on sodium-ion cells. The page says it charges safely at -15°C (5°F) and discharges down to -25°C (-13°F), and it is rated for 4,000+ cycles. It is intended for home backup and cold-weather outdoor use.
View at Bluetti →Sponsored link; we may earn a commission.
Capacity
900Wh
Continuous
1500W
Peak / surge
2250W
Chemistry
sodium-ion
Weight
15.9kg
Key features
- 1,500 W output with 2,250 W lifting (surge) power for high-demand appliances
- Charges at 1,900 W with AC plus solar; 80% in 35 minutes and full in 52 minutes at a battery temperature of 10–25°C (50–77°F)
- Charges safely at -15°C (5°F) and discharges at -25°C (-13°F); at -25°C it still delivers 80% discharge capacity
- Rated for over 4,000 charge cycles and a 10-year expected life
- Standby loss of 1.5 W; no-load consumption of 3.8 W with DC on, 9 W with AC on, 10 W with AC + DC on
- Sodium-ion chemistry with AI-BMS, structural safeguards, and electrical security; avoids lithium and cobalt
- Charging options listed include solar, car, and AC charging cables
What it is for
- Home backup
- Winter camping and ice fishing
- Snow photography and polar research
- Backup power during winter blackouts
Specifications
| Capacity | 900 Wh |
|---|---|
| Continuous output | 1500 W |
| Peak / surge | 2250 W |
| Battery chemistry | sodium-ion |
| Weight | 15.9 kg (35.1 lb) |
From the Bluetti page. Values the manufacturer does not publish are left out.
What is in the box
- Solar Charging Cable x1
- Car Charging Cable x1
- AC Charging Cable x1
- Grounding Screw x1
- User Manual & Warranty Card x1
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 17 h |
| Chest freezer | 100 W (500 start) | yes | 24 h |
| CPAP (no humidifier) | 35 W (40 start) | yes | 20 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 12 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 59 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 12 h |
| TV 50" | 75 W | yes | 9.5 h |
| Sump pump 1/2 HP | 920 W (2150 start) | yes | 0.8 h |
| Well pump 1/2 HP | 880 W (2000 start) | yes | 0.8 h |
| Space heater 1500 W | 1500 W | yes | 0.7 h |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Vtoman FlashSpeed 1000
828 Wh, 1000 W
Vtoman Jump 1500X
828 Wh, 1500 W
Dabbsson 1000L
1008 Wh, 1200 W
DJI Power 1000 Mini
1008 Wh, 1000 W
Westinghouse iGen1000s
1008 Wh, 1500 W
Allpowers P1800
1024 Wh, 1800 W
Anker SOLIX C1000 Gen 2
1024 Wh, 2000 W
Connection and wiring
Follow the diagrams in the Bluetti manual.
Open the Bluetti manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| E004 | The output voltage is outside the expected range, or the grid connection is not proper. | Ensure the output voltage is within ±10% of the rated voltage or proper grid connection. | 21 |
| E016 | The internal fan is blocked, unplugged, or not functioning properly. | Check if the fan is blocked, unplugged, or not functioning properly. Ensure proper ventilation. | 21 |
| E117 | Grid oscillation has been detected at the grid input. | Disconnect the grid input and contact BLUETTI support for further assistance. Call service if it persists. | 21 |
| E074 | The battery management system (BMS) has detected a fault. The specific fault is shown in the mobile app. | Check the specific fault in the mobile app. If the battery is too hot or too cold, let the unit reach a suitable temperature before charging or using it (charging -15°C to 40°C; discharging -25°C to 40°C). | 22 |
| Others | Other errors not listed in the error code table. | Contact BLUETTI support for help. Call service if it persists. | 22 |
| E001 | The inverter is overloaded because the connected devices draw too much power. | Check whether the power consumption of your devices is too high. Reduce the load if necessary. | 23 |
6 of 23 codes. From the Bluetti manual. All 23 Elite 200 V2 / Apex 300 / Elite 100 V2 / AC70 codes →
FAQ
How long will the Bluetti Pioneer Na run a refrigerator?
About 17 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Bluetti Pioneer Na start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 2250 W peak. That covers a typical 1/2 HP sump pump (about 2150 W to start). Use the calculator with your exact pump.