Bluetti Elite 100 mini
1004.8 Wh, 700 W
Pecron F1000LFP
Power station. Specs from the manufacturer page (checked ).
The Pecron F1000LFP is a 960 Wh portable power station with 1500 W output. Its XT60-M port accepts solar panel input.
Check on Amazon →Sponsored link; we may earn a commission.
Capacity
960Wh
Continuous
1500W
Solar input
600W
Key features
- 960 Wh capacity and 1500 W output, per the page title
- XT60-M solar input: Voc 11V~60V, 600W max, 14A max
- USB output rated 5V, 9V, 11V, 33W max
Specifications
| Capacity | 960 Wh |
|---|---|
| Continuous output | 1500 W |
| Solar input | 600 W |
From the Pecron page. Values the manufacturer does not publish are left out.
How long it runs common appliances
| Appliance | Watts | Runs? | Hours |
|---|---|---|---|
| Refrigerator (with freezer) | 120 W (600 start) | yes | 18 h |
| Chest freezer | 100 W (500 start) | yes | 25 h |
| CPAP (no humidifier) | 35 W (40 start) | yes | 22 h |
| Gas boiler (pump + controls) | 120 W (300 start) | yes | 13 h |
| Wi-Fi router + modem/ONU | 12 W | yes | 63 h |
| Starlink (standard dish) | 60 W (100 start) | yes | 13 h |
| TV 50" | 75 W | yes | 10 h |
| Sump pump 1/2 HP | 920 W (2150 start) | surge too high | — |
| Well pump 1/2 HP | 880 W (2000 start) | surge too high | — |
| Space heater 1500 W | 1500 W | yes | 0.7 h |
Assumes 88 % inverter efficiency, 90 % usable capacity and typical duty cycles. Build your own list in the calculator.
Similar portable power stations
Dabbsson 1000L
1008 Wh, 1200 W
DJI Power 1000 Mini
1008 Wh, 1000 W
Westinghouse iGen1000s
1008 Wh, 1500 W
Allpowers P1800
1024 Wh, 1800 W
Anker SOLIX C1000 Gen 2
1024 Wh, 2000 W
Bluetti AC2P
1024 Wh, 1800 W
Bluetti Elite 100 V2
1024 Wh, 1800 W
Connection and wiring
Follow the diagrams in the Pecron manual.
Open the Pecron manual (PDF) →
Error codes and troubleshooting
| Code | Meaning | What to do | Manual page |
|---|---|---|---|
| Overload | Overload protection has been triggered because total power output is too high. | Disconnect some devices to reduce total power output. The alarm resets automatically once output returns to normal. OVERLOAD flashes and the buzzer sounds 2 times. | 3 |
| 02 | Battery voltage is low. | Manual gives no specific remedy for this code. Other alarm interfaces show a flashing exclamation mark on the display. | 14 |
| 03 | Battery discharge current is too high. | Manual gives no specific remedy for this code. Other alarm interfaces show a flashing exclamation mark on the display. | 14 |
| 04 | Battery charge current is too high. | Manual gives no specific remedy for this code. Other alarm interfaces show a flashing exclamation mark on the display. | 14 |
| 05 | A short circuit has been detected in the battery. | Manual gives no specific remedy for this code. Other alarm interfaces show a flashing exclamation mark on the display. | 14 |
| 06 | The battery connection has been lost or disconnected. | Manual gives no specific remedy for this code. Other alarm interfaces show a flashing exclamation mark on the display. | 14 |
6 of 43 codes. From the Pecron manual. All 43 F3000LFP / F1000LFP codes →
FAQ
How long will the Pecron F1000LFP run a refrigerator?
About 18 hours for a typical 120 W refrigerator that runs 35 % of the time, after inverter and depth-of-discharge losses.
Can the Pecron F1000LFP start a sump pump or well pump?
Starting surge matters more than running watts: this unit is rated 1500 W output (no separate peak published). That is below a typical 1/2 HP sump pump start (about 2150 W); check your pump label. Use the calculator with your exact pump.