Pulsar PG12000BCO Low Oil LED
What it means: The engine oil level has fallen below the safe operating limit (270 ml or less). The engine shuts off automatically and cannot restart until the proper oil amount is added.
What to do
Add the appropriate oil until the level is at the proper mark. SAE 10W-30 is recommended for general use. Do not run the engine with too little oil.
When to call service
The manual lists steps the owner can take. If the code comes back after them, or you are unsure, contact an authorized service dealer. The unit stops or will not start until the cause is cleared.
Source: official Pulsar manual, page 14, read . Summary of the manual, not a reproduction.
Models this manual covers
Pulsar PG12000BCO, Pulsar PG7750BCO, Pulsar PG6580BCO, Pulsar PG105TiSRCO, Pulsar PG15KVTWBCO, Pulsar PG3500MRCO, Pulsar PGD170TiSRCO, Pulsar PG13000BRCO, Pulsar PG6580ECO, Pulsar PG4000BiSRCO, Pulsar PG5000BiSRCO, Pulsar PGX5250BiXCO, Pulsar PGD95BiSCO, Pulsar PGD105TiSCO.
Other PG12000BCO codes
Questions
What does Pulsar Low Oil LED mean?
The engine oil level has fallen below the safe operating limit (270 ml or less). The engine shuts off automatically and cannot restart until the proper oil amount is added. (Pulsar manual for the PG12000BCO, page 14.)
How do I fix Pulsar Low Oil LED?
Add the appropriate oil until the level is at the proper mark. SAE 10W-30 is recommended for general use. Do not run the engine with too little oil.
Fuel, gas and electrical work on a portable / inverter generator is for qualified technicians; follow the safety section of the manual. All 8 PG12000BCO codes →